Pleat Filters

PowerGuard™ pleated air filters (MERV 11) are designed for use in applications that require high initial efficiency and non-shedding media, including pre-filtration and single filter applications. Available in three sizes (1-, 2- or 4-in thickness).

DP-green® 13 pleated air filters offer extremely high filtration efficiency (MERV 13) and can provide points toward LEED green building certification. Available in multiple sizes (1-, 2- or 4-in thickness).

DP® Max (MERV 8) pleated air filters exhibit low-pressure drop and high dust-holding capacity for performance in challenging HVAC applications. Available in multiple sizes (1-, 2-, 4-, and 6-in. thickness) with varying flow rates (210–3,640 cfm).

Airguard® DP® HT pleated air filters are designed for continuous operation in high-temperature air handling applications — up to 500°F (260°C). Available in three sizes (1-,2-,and 4-in thickness). Mechanical efficiency: MERV 8 per ASHRAE 52.2-2007.

DP® (MERV 8) pleated air filters exceed ASHRAE Standard 52.2 air cleaning specifications for filters installed upstream of cooling coils. Available in three sizes (1-, 2- or 4-in thickness) with flow rates ranging from 210–3,640 cfm.

Airguard® XTREME+Plus®(MERV 8) self-supported, pleated filters offer extreme durability and extended service life in applications with low and medium dust-loading conditions. Available in two thicknesses(1 or 2-in). Air flows range from 415–2,170 cfm.

DP-green® Max (MX13) Standard Capacity MERV 13 wire back pleated filter with unique, high-quiality media, achieves a strong MERV 13 performance in a reduced pleat count configuration.